Orbibend 112 - Bending arm Orbibend 112 - Bending arm https://simatautomation.com/images/wildweb/prodotto14/Orbibend 112 - braccio 800.jpg
Orbibend 112 - Feeding with clamp Orbibend 112 - Feeding with clamp https://simatautomation.com/images/wildweb/prodotto14/Orbibend 112 - traino 650.JPG
Orbibend112 - Small sized decoiler Orbibend112 - Small sized decoiler https://simatautomation.com/images/wildweb/prodotto14/Orbibend 112 - Aspo piccolo 800.jpg

The mandrelless tube bender you should have
ORBIBEND with its mobile orbital cut surpasses the normal mandrelless machines and marks a new step in the evolution of bending machines. (Patent by Simat) 
A smart orbital cut
>A MOBILE ORBITAL CUT able to cut the tube in unique ways(Patented by Simat):
Cut at the end of the bend: cut of the tube at the end of the curve without the need to trim the tube later with short ends
Pre-cut while bending: the pre-cut is done in masked time during the bending phase and this allows to save cycle time
Fast and always the same
Towing by means of a clamp supported by ball screw:
the tube is always securely held granting maximum accuracy between the bending planes. The clamp avoids deformations and slippings of the tube due to the feeding of the tube by means of rollers. No more marks on the surface of the tubes due to encoders
Motors with absolute encoders:
There is no need for zeroing with zero sensors or limit switches. The machine is always ready from the moment it is switched on
Zero backlash gearboxes for robotics :
Maximum accuracy and repeatability in positioning
Bend as you want
Compression bending
Multi-radius bending in process
Right and Left in process 
Quickly change production
Change of tools in few minutes thanks to quick change systems and solutions designed to make operations fast and easy, such for example the quick ghange system of the straightening rollers
You can also end-form
ORBIBEND can be combined with a end-forming machine of MACH series, so in addition to bending and cutting, you can also end-form, taper, ram form, mill, and roll the ends of the pipes
It is also possible to connect the machines with a robot to end-form both the endings of the tubes
The factory of tomorrow
Machines are ready for the Industry 4.0 to simplify the monitoring of your factory and always have control over the activities
Respect the environment
Latest generation motors with the reinstatement of the braking current into the network in order to limit consumption
Saving raw material you avoid wastes and eliminating the need for washing reduce the environmental impact.
Good first take!
Thanks to the GBS3D Simulator you can check the faseability of the product before start the production. A 3D graphic interface shows the vistual generation of the piece and calculates the the possible collisions and reports them. You save material and the pieces are suitable from the first

Product features

  • Full electric machine, manual settings are not needed when you change production
  • Maximum workable diameter: 12 mm
  • Orbital cut patented by SIMAT: cut at the end of the curve and cutting while bending
  • Saw blade cut placed after the bend (optional)
  • Compression bending (bending without mandrel)
  • Multi- radii in process
  • Towing by means of a clamp supported by a ball screw for maximum accuracy and speed
  • Not motorized vertical and horizontal straightening rollers
  • Quick change of tools
  • Possibility to integrate the machine with robots and other SIMAT's machines
  • SimUI HMI, quick and intuitive
  • GBS3D graphic simulator
  • Sectors: HVSC, Automotive, Aerospace, furniture